Decks and coamings completed.
Over the last few days, I finish the decks and coamings. Decks were first cut to rough size and then a router was used to get to the final size. The … Continue reading
March 15, 2015 · Leave a comment
Hull – Joints glass taped.
Over the last three days, mostly after the kids went bed, I worked on glass taping the joints. The whole process took about eight hours, 3X vs. what I expected. … Continue reading
March 8, 2015 · Leave a comment
Hull flipped right side up, excess epoxy cleaned up and hull alignment checked
Today, I flipped the boat right side up. It’s been about 2 moths since I saw the boat this direction. Again, two young daughters won’t help much here so I … Continue reading
March 4, 2015 · Leave a comment
Bottom – fairing and two epoxy fill coats; didn’t go very well.
Last week, I faired bottom, especially where the 3 in glass tapes were added and applied two layers of epoxy fill coats. Two epoxy fill coats were added over 4 … Continue reading
March 2, 2015 · 2 Comments
Han Learns to Build a Boat - Jim Michalak's Mayfly 14 